How To Pitch a Tent

Equipment:

Pegs

Hammer

Poles

Fly (outer tent)

Base

Interior

Inner Tent

Instructions:

(Be aware that this may not be suitable for some types of tents).

During this process, make sure that you put spare pegs and into the bag that it came from.

1. First of all, you will need to unfold the base of the tent and lay it down. Ensure that the opening if the tent is facing the right way. Get a peg and place it through the eye lit. Hammer it in to the ground at a 45 degree angle AND so it is a bit hard to pull out. Repeat on every corner.

2. Once you finished hammering the pegs, you would have to get the poles out and clip the poles out and clip the black hooks on to the poles. One pole, through the inner tent. Once they reach the other side of the tent have a friend pull it out and put it in the second smaller eyelit. Repeat this process for the second pole.

3. Thirdly, you will need the fly (outer tent). Place it carefully on top of the inner tent. Make sure that the fly’s entrance matches the inner tents door.

4. You will find that there are little ropes attached to the fly. These are called GuyRopes. You will need more pegs for this. Hammer them down as you did the same with the four corners. But you don’t need to secure it as tightly.

5. Once you have finished that, you may admire you’re perfectly pitched tent.

Hopefully . . . . . .